1. The color options are numerically coded with the following values.
a) Ranging from 0 through the positive integer
b) Ranging from 0 to 1
c) Ranging from 0 to -0
d) Only c
Answer
Answer: a [Reason:] Color options can have any value from 0 to any positive number.
2. In color raster system, the number of color choices available depends on
a) colors in frame buffer
b) Amount of storage provided per pixel in frame buffer
c) RGB color
d) Neither a nor b
Answer
Answer: b [Reason:] The amount of storage provided per pixels in frame buffer provides verity range of colors.
3. The color code “000” is for
a) White
b) Black
c) Blue
d) Green
Answer
Answer: b [Reason:] All zero means it is black color (the mixture of red, green and blue).
4. Color information can be stored in
a) Main memory
b) Secondary memory
c) Graphics card
d) Frame buffer
Answer
Answer: d [Reason:] The frame buffer is a space that is used to store the color information.
5. Whenever a particular color code is specified in an application program, the corresponding binary value is placed in?
a) Color look-up table
b) Directly in frame buffer
c) a or b
d) Video lookup table
Answer
Answer: b [Reason:] With the direct storage scheme, the binary values of color are stored in frame buffer.
6. The range that specifies the gray or grayscale levels is
a) The value range from -1 to 1
b) The value range from 0 to -1
c) The value range from 0 to 1
d) Any one of the above
Answer
Answer: c [Reason:] Any value ranging from 0 to 1 can specify grayscale levels.
7. With 3 bits per pixel, we can accommodate 8 gray levels. If we use 8 bits per pixel then what is the value of gray levels?
a) 18 gray levels
b) 128 gray levels
c) 256 gray levels
d) No color
Answer
Answer: c [Reason:] 8 bits per pixel means 2 power 8 i.e. 256.
8. With the display intensity corresponding to a given color index ci calculated as
a) Intensity=0.5[max(r, g, b)+ max(r, g, b)]
b) Intensity=0.5[min(r, g, b)+ min(r, g, b)]
c) Intensity=0.5[max(r, g, b)- max(r, g, b)]
d) Intensity=0.5[min(r, g, b)+ max(r, g, b)]
Answer
Answer: d [Reason:] None.
9. A user can set color-table entries in a PHIGS application program with the function
a) setColourRepresentation (ws, ci, colorptr)
b) setColorRepresentation (ws, ci, colorptr)
c) setColour (ws, ci, colorptr)
d) setColourRepresentation ()
Answer
Answer: a [Reason:] By using setColourRepresentation (ws, ci, colorptr) we can set the color-table.
10. If any intensity input value near 0.33 would be stored as the binary value 1 in the frame buffer, then it displays
a) Dark green color
b) Light gray color
c) Dark gray color
d) White or black
Answer
Answer: c [Reason:] The intensity value 0.0 and 1 for black white respectively, and it is 0.33 for dark gray and 0.67 for light gray.
